Technical specifications:

• Solids content: Not applicable
• Hardness: Not applicable
• Chemical resistance: Extreme (pH 0–13)
• Durability: Up to 2 years on windshields / 3+ years on side and rear windows
• Film thickness: Not applicable
• Curing time (flash time): Instant
• Coverage: 10 ml per vehicle
• Water contact angle: 118°+ with low glide angle
• Operating temperature: 4°C to 38°C
• Applicable surfaces: Glass (tempered and laminated)
• Expiration: 12 months unopened / use within 6 months of opening

Kit contents:

• 1 bottle of 30 ml with dropper
• 1 microfiber applicator pad
• 1 detailed instruction card

Prior preparation:

Proper preparation is essential to ensure the adhesion and effectiveness of the coating:

1. Decontamination: Wash the glass with Armour Detail Supply's Decon Soap and Iron Remover . Then, use a clay bar or synthetic glove to remove embedded contaminants.
2. Polishing (optional but recommended): Polish the glass to remove traces of old repellents and promote coating adhesion.
3. Final cleaning: Use Armour's Panel Prep to remove oils or polishing residue. If you haven't polished, repeat this cleaning twice.

You're now ready to apply Armour Glass Coating!

Application:

1. Applicator priming: Apply 3 lines of product to start. In subsequent applications, a small amount will suffice.
2. Sectional application: Apply in circular motions with medium to firm pressure. It adheres instantly and can be removed immediately or after a few hours.
3. Leveling: Using a short-pile microfiber towel (pearl weave), level the coating to 95%. Finish with a second, softer towel (plush) for a perfect finish. Remove any visible residue or dark areas.

We recommend applying two coats to the windshield. You can apply the second coat immediately or wait, as you prefer.

Aftercare:

• No curing time required! The vehicle can be driven and get wet immediately after application.
• The coating requires minimal maintenance and is compatible with most glass cleaning products.