Use :

-Prepare the surface by means of a safe and thorough cleaning.
-Then perform a chemical decontamination of the paint.
-You can improve the paint with a pass of our BadBoys One Step polishing paste, using other BadBoys polishing pastes.
-Before applying UCC, the surface should be degreased with BadBoys Panel Wipe, preferably twice.
-Apply the coating when the paint is cold and dry, in a room with controlled temperature and no sunlight.
-Using a clean, dry applicator, apply a small amount of coating and spread the product with transverse movements over the surface.
-Depending on the ambient temperature, wait between 30 and 60 seconds before removing the excess with a suitable microfiber cloth. (You will need several cloths.)
-Use another microfiber cloth to polish the surface until it is shiny. (Using an inspection light is recommended.)
-After completing the process, leave the car in a temperature-controlled place (never below 10ºC) for 24 hours for ideal application.

Tips :

-Use only the most suitable RRC applicator for the job.
-Remember the Light.
-The second coat should only be applied after 10-12 hours or after heating the coating.
-The coating maintenance must be carried out by hand washing with our BadBoys Ceramic Shampoo and BadBoys Ceramic Detailer.

Recommendations:

-Avoid humidity for the next 24 hours after application.
-After the coating dries, the car should be washed carefully.
-Be careful with any dirt that may be present in the room during the coating hardening process. It is very important that it is free of sand, dirt, etc.
-Store the UCC bottle in a cool place, avoid freezing or overheating it.
-Always use the recommended products to obtain the best possible result.

Attention :

-Do not apply the coating at temperatures below 10ºC in a controlled environment; it should not be humid or too hot.

-Do not use the product in sunlight.