Instructions for use: Before use, ensure the rim is cool to the touch and the work area is free from sunlight and gusts of wind. Prepare a solution at the appropriate concentration for the accumulated impurities (use with cold water). Remove loose dirt with "Bad Boys Traffic Film Remover" and rinse the wheel thoroughly with pressurized water. Apply the solution to a damp rim using the supplied sprayer. Leave the solution on the rim surface for a few minutes, preventing it from drying. Work the solution into the surface and hard-to-reach areas of the rim with a brush; do not allow it to dry. Rinse the wheel with pressurized water and wash thoroughly with "Bad Boys Alkaline Shampoo" to remove and neutralize any remaining solution. Rinse the wheels thoroughly with a high-pressure washer and dry the surface. Repeat the last five steps if necessary.

Recommended acid solutions: Dilution 1:1 to 1:4, for hard-to-remove contamination, Dilution 1:10, for light contamination.

Recommendations: Before use, always test the effect of the preparation on a less visible area. Use only on a pre-moistened surface. Always wash tires one at a time. Always pour acid into water when preparing the solution. Use only cold water for dilution. Store in a tightly closed container in a cool, dry place, avoiding frost and overheating. Rinse the sprayer in water after each use. Protect from direct sunlight. Always wear suitable protective clothing.

Caution: Do not use on matte, chrome, polished, anodized, etc. rims. Do not allow to dry on a clean surface. Do not use the product on a hot surface. Do not use concentrated. Do not allow contact with glass.