Optimum Gloss-Coat is designed to provide resistance against damage caused by harsh detergents and swirl marks often inflicted during the washing process. Surfaces coated with Optimum Gloss-Coat will be protected for up to two years.
Optimum Gloss-Coat forms a glossy, shinier, slicker protective layer that is less prone to wash marks and deterioration. Optimum Gloss-Coat creates a self-cleaning finish that is considerably easier to clean and maintain compared to waxes and sealants.
Optimum Gloss-Coat can be applied to all exterior surfaces. It is not recommended for glass, as improper application can impair visibility. For other exterior surfaces, Optimum Gloss-Coat is a highly effective, clear protective coating.
Optimum Gloss-Coat is an extra barrier between the elements and your vehicle's paint. The paint will retain its color, and contaminants will be blocked to keep the paint smooth and clean.

INSTRUCTIONS:
1. Polish the paint with the Optimum Hyper Polishing system to remove any defects.
2. Clean the surface with Paint Prep to remove all oils, waxes, and polishing silicones.
3. Soak the applicator in an X pattern across the pad. Only a few drops will be needed for each back panel.
4. Apply Optimum Gloss-Coat to a single panel at a time in a thin layer using two directions, in a circular direction or from front to back.
5. After 5 minutes, inspect the panel with adequate lighting for any thick areas that have not disappeared.
6. Use a paint-safe foam or microfiber applicator to level any streaks. This step is crucial, as any uneven areas will need to be sanded down if left to cure. The panels will feel slightly tacky and will self-level during curing, so avoid any unnecessary contact or cleaning to achieve the best results.
7. Repeat steps 1 through 6 where the application is desired.